PVC Roofing Membrane

PVC Roofing Membrane

1.Product overview The PVC Roofing Membrane(Exposed type) is a composed flexible waterproof membrane made from polyvinyl chloride resin as the main material,mixed with defoamer, aging resisting agent and ultraviolet light absorber. This product has high plant-roof puncture resistance,so it is...

Product Details

PVC Roofing Membrane

1.Product overview

The PVC Roofing Membrane(Exposed type) is a  composed flexible waterproof membrane made from polyvinyl chloride resin as the  main material,mixed with defoamer, aging resisting agent and ultraviolet light  absorber.
 This product has high plant-roof puncture
 resistance,so  it is widely used on roof waterproofing  projects especially plant-roof.

 

2.Product Categories
 fiberglass mesh, fiberglass non-woven  fabrics or polyester non-woven fabrics can be added as inner layer or backing  to enhance product tensile strength.

Categories

Introduction

Standard

Item NO.

P Type

Membrane reinforced by embedded fiber    mesh(fiberglass mesh,polyester fabrics). This is usually suitable for    single-ply waterproof system for roof by welding and mechanical fastening.

GB27789-2011

 

DYP-816

H Type

Homogeneous membrane.  This is usually suitable for  metal roof, general basic construction.

GB27789-2011

 

DYP-817

L Type

 Membrane reinforced by non-woven    fabric backing.  This is usually    suitable for concrete roof by welding and adhesion.

GB27789-2011

 

DYP-818

image004.jpg

 


3.Product Features
1)The product is plant-root  puncture resistant, long service life, high tensile strength & elongation,  can effectively
 resist the destruction of the waterproof  layer due to structure deformation.

  1. Resistance  to chemical corrosion & mildew, especially applicable to tunnel  waterproofing and planting roof

 waterproof engineering.

  1. Aging resistant,  wind uplift resistant, heat-deformation resistant, suitable for exposed roof  system.

  2. High  flexibility under low temperature,flame retardant feature ensures High construction  safety.

  3. Tightly bond  with substrate on hot gas welding, perfect seam welding, and no environmental  pollution.


4.Product Specification

Thickness/mm

1.2

1.5

1.8

2.0

Width/mm

1000/2000

1000/2000

1000/2000

1000/2000

Length/m

20/25

20/25

20

15


5.Application scope
 1)Industrial and civil building basement and  roof waterproof engineering, roofing engineering including planting
 roof,  flat roof, sloping roof, concrete roof, light steel structure roof as well as  both interior & exterior roof.
 2)Large grain depot, beam field, landfill,  artificial lake, pipe trenches & municipal engineering of waterproof, etc.
 3)Subway, road, rail tunnels, bridges, civil  air defense engineering, etc.


6.Executive standard & Performance index 

Executive standard: GB12952-2011  PVC    Waterproof Membrane

Item

Index

H

L

P

G

Top    side resin thickness/mm  ≥

-

0.40

Tensile    performance

Maximum    Tension/(N/cm) ≥

-

120

250

-

Tensile    Strength/Mpa  ≥

10.0

-

-

10.0

Max    Elongation Rate/%  ≥

-

-

15

-

Elongation    at Break/%  ≥

200

150

-

200

Heat-treatment    size change rate/%  ≤

2.0

1.0

0.5

0.1

 Low-temperature Bending

-25℃,no    crack

Water    Tightness

0.3Mpa,2h,    no leakage

 Impact-resistance

0.5kg·m,no    leakage

Joint    Peel Strength/(N/mm)  ≥

4.0    or material damage

3.0

Right    Angle Peel Strength/(N/mm)  ≥

50

-

-

50

Trapezoidal    Tear Strength/N  ≥

-

150

250

-

Water    absorption(70℃,168h)/%

After    immersion  ≤

4.0

After    open time  ≤

-0.40

 

7.Construction process scheme: 

 1)Mechanical Fastening(steel roof);
   1.Substrate treatment – 2.Paving  vapor barrier – 3.Fastening insulating layer – ④Paving  waterproof membrane – ⑤Fastening waterproof membrane – ⑥Hot  gas welding waterproof membrane.


image005_副本.jpg

 

 2)Full-adhibiting Method(concrete roof)
   1.Substrate treatment – 2.Snap  lines for alignment – 3.Paving waterproof membrane – ④Paint  adhesive – ⑤Rolling to exhaust gas - ⑥Hot gas welding waterproof  membrane

image007.jpg

 

8.Storage
 1)Different types and  specifications of the products should be stacked respectively. Pay attention to  ventilation.
 Storage temperature should not be higher than  45℃,  flat storage stack height no more than five layer, put
 single pile vertical, keep product away from  acid, alkali, oil, organic solvent, etc.
 2)Transportation  to prevent tilt or lateral pressure, cover with cloth if necessary.
 3)Under  the condition of normal storage & transportation, storage period is one  year.


Inquiry