DYC-734, K11 high flexible Waterproof Coating (Advanced Flexibility), selecting imported high polymer water-proof emulsion and multiple assistants as the basic raw materials, is a two components polymer modified water-proof paint. Mixing powder form and liquid form proportionately creates a layer of flexible waterproofing film existing strong boding strength to concrete and mortar that results in excellent waterproofing effect.
The coating can restrain bacterial growth and prevent humidity.Can be constructed on rough base.
Nontoxic and harmless, can be used in drinking pool and fishpond.
Can directly stick with tile or make level.
Can be constructed on moist base.
Can cover tiny crack and resist slight shaking.
|Executive standard: JC/T2090-2011|
K11-Flexible Cement Base Polymer Waterproof Coating
solid content (%)
tensile strength (Mpa)
elongation rate (%)
adhesive strength against damp
0.3Mpa, 30min, no leakage
1. Substrate process: before construction, keep the substrate clean, smooth, no-oil pollution and no-water. If the base has cracks or tube root set groove, it should fill in the seal material.
2. Local strengthening layer process: before large area of construction waterproof paint , in the inside and internal corner and pipeline parts should brush 2-3 times acrylic spray paint. When put a layer of fetus with increased reinforced material, tire body should be sandwiched between waterproof acrylic spray paint .
3. Brush and paint waterproof acrylic spray paint layer: brush and paint waterproof layer, it should be more times (2-3 times), each time should be dry, and apply again, and each time direction should be perpendicular to each other.
4. Surface brush: roller wateproof acrylic spray paint , and add a small amount of water dilution waterproof acrylic spray paint , it can improve the surface smooth, bright and clean effect.
Concrete, brick and mortar wall surface and floor.
Basement, parking lots, balcony, bath room, floor and garage.
Wiping treatment for paving stone, ceramic tile, wood floor and wall paper to prevent damp and salinity contamination.
Edible pool, swimming pool, fishing pool and waste water treatment
pool for water-proof purpose.
Reparation good coating had better in eight hours after use.
Every time the construction should be in the first two times construction 3 to 4 hours.
Every time brushing thickness should not be more than 0.6 mm thick, otherwise it might crack.
Mixed good coating with sand nets filtering effect is better.
1) Products of different types and specs be sorted and stored seperately and kept from insolation, rain and fire. Provide good ventilation. Storage temperature be 5~40℃.
2) Under proper storage, product shelf life is 12 months.